Product Certification Service Organization

1. Introduction to Certification

Argentina ENACOM certification is a mandatory certification for wireless and telecommunications products. All equipment connected to the public telecommunications network and using the radio frequency band need to apply for ENACOM certification. For the export of wireless communication products to Argentina, it is required to apply for ENACOM certification. The original control unit of Argentina's wireless certification was CNC, which was later changed to AFTIC, and then changed to ENACOM after 2015.

2. Certification mark

3. Certification category

1. Homologación (Argentine standard certification)
2. Codificación (recognized certification where no standard exists).

4. Product Range

All equipment connected to public telecommunications networks and using radio frequency bands

5. Required information

1. Spanish instructions
2. Product nameplate
3. Photos inside and outside the product
4. Test software
5. Technical specifications
6. Technical data
7. Antenna specification
8. Customer basic information form
9. Argentine importer information (if any)

6. Sample requirements

3 samples

7. Certification process

1. Send samples to Argentina for testing

2. After the test is completed, register with ENACOM

3. Issue ENACOM certificate

7. Certification cycle and validity period

Valid for 3 years, certification cycle: 12-14 weeks (calculated from the arrival of the sample in the Argentine laboratory for testing and complete information)

8. Factory inspection

No factory inspection required

9. Matters needing attention

1. One model and one certificate

2. One trademark and one certificate

3. The certificate holder is the Argentine importer

10. Specifications for the use of logos

Once the certificate is issued to the local provider, a specific RAMATEL ID will also be issued. This ID needs to be affixed directly below the RAMATEL Regulatory Identity (Resolution No. 854 RAMATEL 2020) logo, which can be made from different variants. Situations where the ID number can be affixed to the right of the label is whether the selected label is a horizontal label or a basic label. The different variants of the RAMATEL label are as follows:

Regulatory logotype (RAMATEL logo) requires Montserrat typeface. RAMATEL ID numbers need to be in Arial font. ID numbers should have a minimum height of 5 points. The measured values for selected RAMATEL label variants are as follows: